Open IoT Board
Open Iot Board is open source hardware board to enable easy development of IoT devices.
- Atmega328 controller based
- On board GPRS
- LCD screen
- On board IR communiation
- Status LED and push button
- Communication header pins to connect bluetooth/Wifi modules
- Headers for Analog pins
- Programmer port to use external programmer to program the board
- High voltage measurement port with voltage divider circuit
- Analog port with LM358 amplifier
-
Relay or switch control port
- Buck converter. The boad can be powered via an energy source of 5 to 35 voltage
- Works with Arduino Software
- Has arduino bootloader
You can also:
- Write your program in arduino environment and load it into the board.
- Use the board with platformio
Board Images
YET TO COME
Getting Started with the board
- Install arduino
- Connect the board to computer via USB
- In arduino==>Tools==>Boards select Open IoT Board
- Open example program and load it in the board
- That’s it.
Limitations:
- Board version 1.0 does not have USB port. This is something will be availabe in the next version of the board.
- The on board LED is not connected to the same pin it is connected in arduino UNO board.
- The markers on the PCB are not great.
- Push button and LED share the same pin.
- The gain for LM358 is fixed. It should be variable.